Parameter Setting - Mitsubishi Electric MELSEC iQ-R Series User Manual

Parameter setting

The mode setting, IP address setting, and recording buffer setting for a recorder module can be set in the parameter setting of
GX Works3.
For details on the parameter setting, refer to the following:
MELSEC iQ-R System Recorder User's Manual (Application)
Operating procedure
1.
Set the module parameters of a recorder module.
[Navigation window]  [Parameter]  [Module Information]  [(target module)]  [Basic Settings]
To read a recording file, a recorder module and a personal computer must be connected with an Ethernet
cable.
Set the IP address and subnet mask of the recorder module in advance.
The IP address setting of a recorder module can be checked in the system monitor.
For details on the system monitor, refer to the following:
GX Works3 Operating Manual
4 PROCEDURE FOR OPERATION
22
4.1 Recording Function