Mitsubishi Electric MELSEC iQ-R Series User Manual page 35

Insertion/removal method of an SD memory card
Make sure to stop file access when removing or replacing an SD memory card.
If the power of a recorder module is turned OFF or the module is reset while a file is being accessed, the file may be
corrupted.
■Insertion procedure
(1)
■Removal procedure
(3)
1.
Insert an SD memory card (1) straight into the SD memory card slot with
its cutout pointed down.
Make sure it is not uplifted after inserting it.
(2)
If it is inserted insufficiently, it may cause malfunction due to poor contact.
2.
The CARD RDY LED (2) keeps flashing until the SD memory card is
ready to be used. Once the CARD RDY LED (2) turns ON, the SD
memory card can be used.
1.
Press the SD memory card lock switch (1) for one second or longer to
stop the SD memory card access.
2.
The CARD RDY LED (2) is flashing while stopping the file access, and it
(2)
turns OFF once the processing is completed.
3.
Push the SD memory card (3) in once, and pull it out straight.
(1)
5 SYSTEM CONFIGURATION
5.3 Recorder Module
5
33