Mitsubishi Electric MELSEC iQ-R Series User Manual page 30

No. Name
(4) SD/RD LED
(5) Ethernet port
(6) SD memory card lock switch (SD
CARD OFF button)
(7) SD memory card slot
(8) Product information marking
A factor of the INFO LED lighting can be checked in the INFO LED information of the "Module Diagnostics"
screen or in the buffer memory. Check the factor and take an corrective action. (MELSEC iQ-R System
Recorder User's Manual (Application))
5 SYSTEM CONFIGURATION
28
5.3 Recorder Module
Description
Indicates the data sending/receiving status in Ethernet.
• ON: Being sent/received
• OFF: Not being sent/received
A port for connecting a recorder module to 10BASE-T/100BASE-TX/1000BASE-T.
(A recorder module distinguishes among 10BASE-T, 100BASE-TX, and 1000BASE-T depending on an external
device.)
A switch for disabling access to an SD memory card to remove it.
Removing an SD memory card is prohibited while the CARD RDY LED is ON or flashing.
For the procedures for inserting and removing an SD memory card, refer to the following:
Page 31 SD memory card
A slot for inserting an SD memory card.
(SD, SDHC standards-compliant: 2 GB (SD) to 16 GB (SDHC))
Displays the product information (16 digits) of a module.