Recording setting
The recording setting for a recorder module can be set by using GX Works3.
For details on the recording setting, refer to the following:
MELSEC iQ-R System Recorder User's Manual (Application)
Operating procedure
1.
Display the "Recording Setting" screen.
[Navigation window] [Parameter] [Recording Setting] right-click [New]
For settings other than recording setting No.1
The following parameters must be set to start the operation of the recording function.
Target module
CPU module
Recorder module
*1 The size required for the capacity of the buffer area setting for data sampling can be checked in the "Recording Setting" screen.
*2 Double-clicking the recording buffer setting icon (
Parameter
"CPU Parameter" "Memory/Device Setting" "Buffer Area Setting for Data Sampling" "(Setting No. to use)"
"(Recorder module)" "Basic Settings" "Recording Buffer Setting"
) opens the "Recording Buffer Setting" screen.
*2
"(Setting No. to use)"
4 PROCEDURE FOR OPERATION
4.1 Recording Function
4
*1
23