Ingenico iCT250 Quick Reference Manual page 12


Supervisor password

Clerk password
Any higher level password is accepted in the place of a lower level
password.
Example: If the application prompts for the Clerk password, then the
Supervisor, Manager and Admin passwords will also be accepted.
Administrator (Admin) Name And Password
Your pre-set Admin name is 1, and your pre-set Admin password is
1234567P.
Your Admin password is an important security feature of your terminal.
It is used to access the Admin menu. The Administrator password is
alphanumeric, with a minimum length of 7 characters, and a maximum
length of 12. At least 1 character must be alphabetic, and at least 1
character must be numeric.
If the wrong Admin password is entered more than 4 consecutive times
while trying to access the Admin menu, the user will be locked out. You
should call the Global Payments Customer Care Centre for help if that
happens.
NOTE: You should change the pre-set Admin password to
one of your own, as soon as possible after
receiving your terminal. For maximum protection
against fraud, you should also change your
Admin password periodically.
Please call the Global Payments Customer Care Centre to set up or
change your own Admin password. Manager/Supervisor/Clerk
Passwords
The Manager, Supervisor, and Clerk passwords are set up by the
administrator in the Admin menu. There is only one Manager, one
Supervisor, and one Clerk password. There is no user name associated
with any of these passwords.