However, like all electronic equipments, the AV-GM06B3-S1 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
(<25ns/100m) for best performance. Unshielded CAT6 with metal RJ45 connectors is recommended. PACKAGE CONTENTS ● 1x AV-GM06B3-S1 ● 1x Rack-mounting ear set ● 1x DC 5V 4A in-line with C7 power cord ● 1x User Manual...
SPECIFICATIONS Model Name AV-GM06B3-S1 CE-H20111-S1 CE-H20211-S1 Technical 2x8 Distribution Amplifier Receiver Receiver Role of usage Transmitter [TX] [long range RX] [short range RX] HDMI compliance HDMI Deep Color & 3D HDCP compliance Video bandwidth Single-link 225MHz [6.75Gbps] Video support 480i / 480p / 720p / 1080i / 1080p60 up to 36-bit color Transmission over Full HD (1080p)-40m (130ft) [CAT.X]...
Power supply 5V 4A DC 5V 2A DC None Power consumption 13 Watts [max] 1.5 Watt [max] 0.1 Watt [max] Operation 0~40°C [32~104°F] temperature Storage temperature -20~60°C [-4~140°F] Relative humidity 20~90% RH [no condensation] PANEL DESCRIPTIONS Front Panel 1.2a / 1.3a: Output format LED indicator [Green: HDMI 1.3 / Red: HDMI 1.2] HDMI Output select: Push button for HDMI output format selection INPUT 1 / INPUT 2: Input LED indicator [Green: HDMI input / Red: RJ45 input] HDMI Input select: Push button for input HDMI source selection...
Page 6
HDMI Signal IN: for cascading from another AV-GM06B3-S1 or CE-H21W11-S1 HDMI INPUT: for connecting to video source, CE-H21V11-S1, AV-GM0693-S1, or another AV-GM06B3-S1 HDMI Signal OUT: for connecting to display through CE-H20111-S1 or CE-H20211-S1; or for cascading to another CE-H21W11-S1 or AV-GM06B3-S1 HDMI OUTPIT 1-7: for connecting to display through HDMI cable or through Cat-5e cable with CE-H20211-S1 attached;...
DIP SWITCH SETTING DIP Switch Position Video Audio Description Pin#1 Pin#2 Default Mode — Up to 1080p Surround Up to 1080p video & surround sound audio output up to 7.1ch (DTS-HD & Dolby TrueHD) Safe Mode — Enforce the system output at 1080p video and ON [ ] Up to 1080p Stereo...
3. Connect all HDMI outputs to the HDMI displays 4. Connect RJ45 output to HDMI over CAT5 receiver through Cat-5e cable 5. Plug in 5V 4A DC power supply. 6. Power on the AV-GM06B3-S1 7. Power on the HDMI displays. 8. Power on the HDMI source(s).
1. Power up the AV-GM06B3-S1. Connect to HDMI OUT7 with the display you want the AV-GM06B3-S1 to learn its EDID. 2. The AV-GM06B3-S1 is only bound to learn the EDID from the display for the HDMI source device connected to HDMI IN2. For HDMI signal input at RJ45 IN1, please use the transmitting device that sends the HDMI signals over CAT5 to the HDMI Signal IN1 of the AV-GM06B3-S1 to learn the EDID of the display.
NOTICE 1. If the DVI or HDMI device requires the EDID information, please use EDID Reader/Writer to retrieve and provide DVI or HDMI display EDID information. 2. All HDMI over Cat.X transmission distances are measured using Belden 1583A CAT5e 125MHz UTP cable and ASTRODESIGN Video Signal Generator VG-859C &...
The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the AV-GM06B3-S1 features and specifications is subject to change without further notice.
Need help?
Do you have a question about the AV-GM06B3-S1 and is the answer not in the manual?
Questions and answers