Husqvarna PG 690 Operator's Manual page 12

the area with a large quantity of water and get
medical aid.
• Do not use batteries that are non-rechargable.
• Do not do modifications to the battery.
• Do not put objects into the air slots of the battery.
• Keep the battery away from sunlight, heat or open
flame. The battery can cause an explosion and
cause burns and/or chemical burns.
• Keep the battery away from rain and wet conditions.
• Keep the battery away from microwaves and high
pressure.
• Do not try to disassemble or break the battery.
• Use the battery in temperatures between -10 °C/14
°F and 40 °C/104 °F.
• Do not clean the battery or the battery charger with
To clean the battery and the battery
water. Refer to
charger on page 33 .
• Do not use a defective or damaged battery.
• Keep batteries in storage away from metal objects
such as nails, screws or jewelry.
• Keep the battery away from children.
Safety devices on the product
WARNING: Read the warning instructions
that follow before you use the product.
• Do not use a product with defective safety devices.
• Do a check of the safety devices regularly. If the
safety devices are defective, speak to your
Husqvarna service agent.
Emergency stop button on the control panel
The emergency stop button is used to quickly stop the
motor. The emergency stop button breaks the mains
power supply.
CAUTION: Do not use the emergency stop
button on the control panel as the stop
button for the product.
12
To do a check of the emergency stop button on the
control panel
1. Turn the emergency stop button (A) on the control
panel clockwise to make sure that the emergency
stop button is disengaged.
2. Turn the ON/OFF switch (B) on the control panel to 1
to start the motor. The LED adjacent to the ON/OFF
switch comes on.
3. Push the emergency stop button on the control
panel.
4. Make sure that LED adjacent to the ON/OFF switch
goes off.
5. Turn the emergency stop button on the control panel
clockwise to disengage.
Emergency stop button on the remote control
The emergency stop button is used to quickly stop the
motor. The emergency stop button breaks the mains
power supply. The emergency stop button on the remote
control cannot be used when the product is operated
manually.
CAUTION: Do not use the emergency stop
button on the remote control as the stop
button for the product.
A
B
1163 - 003 - 22.01.2020