SDS 2.1 software displays well
information if you leave the
cursor over the well
38
June 23, 2003 9:39 am, MFC_QSG_text.fm
Once you have imported the setup file into an SDS document, the
SDS 2.1 software assigns the detectors for each assay to the
appropriate wells as indicated in the card map.
Figure 2
shows an SDS document after an SDS setup file has been
imported.
Figure 2 SDS document after importing an SDS setup file
Applied Biosystems Micro Fluidic Card Getting Started Guide
DRAFT
Setup tab
displays
information
about each
well. Selected
wells are
marked with
an X.