4.2
Print Options
[Speed]
This shows the print speed for the stock that you set on the [Page Setup] screen. If you select
[Custom] for [Stock] on [Page Setup], you can change the settings on this screen.
[Darkness]
This shows the print darkness for the stock that you set on the [Page Setup] screen. If you select
[Custom] for [Stock] on [Page Setup], you can change the settings on this screen.
You can set 10 levels, from [1] to [10]. The bigger the number, the darker the ink.
[Top]
You can adjust the print base reference point in vertical direction (the height direction of the
media).
[Left]
You can adjust the print base reference point in horizontal direction (the width direction of the
media).
[Set fixed document length for continuous label]
Feed the entire label to an appropriate position after the product finishes printing. For a
continuous label, the one label is the feed amount because the feed amount cannot be
determined by the sensor.
[Non-standard protocol output]
Substitute and output part of the control code as ASCII readable characters. This feature is for
host environments that cannot use binary data.
67