Table of Contents
Advertisement
4. Settings on the [Configure Printer] Tab
Product settings can be configured on [Printing Defaults] and [Preferences]. As the settings that can
be configured are the same on both screens, this section will use preferences (print settings) to
describe the settings.
[Help] is available on all screens. Click it to display a description of that screen.
Check box behavior
When a green or blue check box is to the right of a setting, they behave in the manner described
below.
Green check box
Selected: [Let printer control this option]
"N/A" will be displayed for the value of the setting. This setting value is not sent to the product
and the product setting value is used. "N/A" will also be displayed for other settings that must be
used in combination with this setting.
Cleared: [Send this parameter to printer]
The setting values are sent to the product.
Blue check box
If you register stock in [Stocks] on the [Driver Settings] tab, this check box will be displayed on the
right of the following items.
Media settings
[Width]
[Height]
Print settings
[Speed]
[Darkness]
If you select the stock to be used in [Stock] on [Page Setup], you can change the above setting
values all at once. For details, refer to "4.1 Page Setup."
Blue check boxes are always on and cannot be cleared. However, if you select [Let printer control this
option], the green check box is selected for the settings that can use the setting values on the
product.
65
Advertisement
Table of Contents
