Table of Contents
Advertisement
[Position]
You can control the position that the command font is inserted into the print data.
[Before page]: The command is inserted before the page starts.
[Before elements]: The command is inserted after the page starts and in front of all objects.
[Element position]: The command is inserted at the position of the object.
[After elements]: The command is inserted after all the objects and before the page ends.
[After page]: The command is inserted after the page ends.
[Merge contents]
This setting is used to apply commands only the appropriate number of times to objects divided
multiple times in lines or on the page.
[No merge]: Any special processing is not performed.
[All text on the same line]:
Apply to text that have the same Y coordinates once using the same font. This setting is
applied even if one line of text is divided into multiple characters.
[All text on the page]:
Apply to all text on the same label once using the same font. This setting is used to apply
text to serial data like initialization and end processing.
Command font usage example
This example shows how to add X21 printer device font as the font name "SATO Command Font" and
use it in an application.
1.
Open [Devices and Printers], right-click the product, and select [Printer properties].
2.
Select [Fonts] on the [Driver Settings] tab and then select [Add] > [Command].
52
Advertisement
Table of Contents
