Table of Contents
Advertisement
1.3
Running the Installation
The printer driver installation procedure differs depending on how the computer and product are
connected.
Check how the product is connected before running the installation.
The printer driver installer is the same as other models. Ports which are not supported by the product
may be displayed. Read this manual carefully and check the port to be used.
1.3.1
Installing the driver when connected via USB or IEEE1284
Plug and Play driver setup
Note:
Automatic printer detection is supported only on a USB port and IEEE 1284 port.
Before starting the installation, close all applications.
To do the printer driver setup, the properties settings, or the print settings, log in with Administrator Privileges.
When you use the printer driver, enable bi-directional communication.
If the terminal service is being started with Windows Server 2008, change the terminal service to the
installation mode. However, it is not guaranteed that the printer driver can be used in the terminal service
environment.
When using multiple products, it is necessary to install as many printer drivers as products, to identify each
product.
After installing the printer driver for the first product, the printer driver for the second and additional products
will be automatically installed when the products are connected to the computer and powered on. However,
the name of the printer drivers will be "driver name (1)", "driver name (2)", etc. To change the driver name,
right-click the product in [Devices and Printers], select [Printer properties], and change the name at the top of
the [General] tab.
1.
Power on the product.
2.
Connect the product to a computer, using a USB cable or IEEE 1284 cable.
The printer driver is located online and downloaded to the computer. Automatic installation starts
immediately.
If the printer driver is available at the Windows Update Site (Automatic installation)
On the latest operating systems (Windows 7 and later), a system notification message is shown. If
you click the notification message, the new [Driver Software Installation] dialog box opens. Monitor
the installation status, using this dialog box. Closing the dialog box finishes the installation.
If the printer driver is unavailable at the Windows Update Site (Manual installation)
If the printer driver is unavailable at the Windows Update site, download the printer driver to the local
disk. Select this product at the SATO download site
http://www.satoworldwide.com/software/gallerydriver.aspx and download "Printer Driver".
Follow these steps to install a printer driver using the manual Windows [Add a Printer] procedure.
10
Advertisement
Table of Contents
