Table of Contents
Advertisement
4.1
Page Setup
[Stock]
Select the default stock from the registered stock. If you select [Custom], you can set [Width],
[Height], and [Sensors] on this screen.
[Custom stock has ID 257]
This check box enables compatibility with older SATO drivers that require a custom stock ID of
greater than 256.
[Copies]
Specify the number of labels to be issued.
[Width]
This setting shows the width set for the stock that you selected. If you select [Custom] for [Stock],
you can change the settings on this screen.
[Height]
This setting shows the height set for the stock that you selected. If you select [Custom] for
[Stock], you can change the settings on this screen.
[Media type]
This setting shows the sensor set for the stock that you selected. If you select [Custom] for
[Stock], you can change the settings on this screen. You can select [Continuous labels], [Labels
with gaps], or [Labels with black marks].
[Media form]
Set the media form as [Roll] or [Fanfold].
[Rotation]
You can set the print rotation angle as [0° - Portrait], [90° - Landscape], [180° - Portrait], or [270° -
Landscape].
66
Advertisement
Table of Contents
