Table of Contents
Advertisement
1.3.4
Installing the printer driver for second and later products
When using multiple products, you need to install printer drivers for each product.
When connected via USB or IEEE1284
1.
Power off the product and connect the product to the computer.
2.
Power on the product.
The Plug and Play feature runs and the printer driver is automatically installed.
3.
If necessary, change the printer name.
Note:
You cannot install the printer driver as port and printer names that have already been created. Change the
name(s).
When connected via LAN, RS232C
Use the same procedure as the first product to install the driver.
1.
Double-click PrnInst.exe.
2.
To finish installing the driver, follow the same procedure as the first product.
Note:
You cannot install the printer driver as port and printer names that have already been created. Change the
name(s).
23
Advertisement
Table of Contents
