Table of Contents
Advertisement
MAINTENANCE
A) Minor Repairs – Minor repairs are considered those that so not involve total disassembly
of the pump. External leaks around the pump, for example, can usually be eliminated by
tightening screws and/or fittings around the leakage area. Replacement of leaking shaft
or O-ring seals is a minor repair that can be done in the field. The Dake service manual
should be consulted for the necessary part numbers.
B) Major Repairs – Major field repairs can be accomplished in an emergency; however, it is
recommended that the Dake factory be contacted for necessary assistance. Dake pumps
are built to give long-term dependable service. If they should eventually require overhaul,
factory rebuilding is recommended when possible since disassembly and assembly can
damage many parts. This minimizes replacements with net savings to the user. Trained
Dake personnel with complete rebuilding and testing facilities permit rapid overhaul and
testing, resulting in minimal downtime for the customer as well as the added advantage of
complete factory testing after repair.
905050
28
Dake Corporation
724 Robbins Road
Grand Haven, MI 49417
www.dakecorp.com
REV112019
Advertisement
Table of Contents
