References And Symbols - AUMA SQ 05.2 Operation Instructions Manual

Part-turn, norm without controls
Hide thumbs Also See for SQ 05.2:
Table of Contents

Advertisement

Safety instructions
1.5.

References and symbols

Information
< >
6
Indicates a potentially hazardous situation with a medium level of risk. Failure
to observe this warning could result in death or serious injury.
Indicates a potentially hazardous situation with a low level of risk. Failure to
observe this warning may result in minor or moderate injury. May also be used
with property damage.
Potentially hazardous situation. Failure to observe this warning may result in
property damage. Is not used for personal injury.
Arrangement and typographic structure of the warnings
Type of hazard and respective source!
Potential consequence(s) in case of non-observance (option)
Measures to avoid the danger
Further measure(s)
Safety alert symbol
The signal word (here: DANGER) indicates the level of hazard.
The following references and symbols are used in these instructions:
The term Information preceding the text indicates important notes and information.
Symbol for CLOSED (valve closed)
Symbol for OPEN (valve open)
Important information before the next step. This symbol indicates what is required
for the next step or what has to be prepared or observed.
Reference to other sections
Terms in brackets shown above refer to other sections of the document which provide
further information on this topic. These terms are either listed in the index, a heading
or in the table of contents and may easily be located.
SQ 05.2
warns of a potential personal injury hazard.
SQ 14.2/SQR 05.2
SQR 14.2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents