Replacing The Micro Switch - KEB COMBISTOP 38 Instruction Manual
Electromagnetically actuated dual-surface spring-applied brake for dry running
Hide thumbs
Also See for COMBISTOP 38:
- Instruction manual (47 pages) ,
- Instruction manual (48 pages) ,
- Instructions for use manual (58 pages)
Table of Contents
Advertisement
Mounting and Start-up
4.1.4.1
Replacing the Micro Switch
Warning!
1
micro switch
socket head screw
2
disc
3
4
hexagon head screw
5
hexagon nut
Dismounting
Remove the two socket head screws (2).
Remove the micro switch (1).
Mounting
The micro switch is mounted in reverse order.
Connect the micro switch according to the following connection diagram:
01.09.2011 Rev. 01
Loss of Braking Efficiency!
Before replacing the micro switch, mechanically secure the load
against unintended movements and disconnect the brake from load!
COMBISTOP Type 38
Page 18
Advertisement
Table of Contents
