Maintenance and Cleaning
7.4
Notes on Cleaning
When cleaning the brake, observe the following notes/instructions:
As a general rule, contaminated linings must be replaced.
Warning!
Caution!
01.09.2011 Rev. 01
Loss of Braking Efficiency!
The friction surfaces must not come into contact with cleaning agents
or solvents, grease, oil, water or other fluids. This results in loss of
torque.
When cleaning components (for example, flange, armature), this note
must be observed without fail!
Warning - Hot Surface!
The heat generated during the operation of the brake causes the
surfaces to heat up!
Due to the risks arising therefrom, always use appropriate personal
protective equipment when operating the brake (see section "1.2.7
Personal Protective Equipment").
COMBISTOP Type 38
Page 33