Operation; Actuating The Hand Release - KEB COMBISTOP 38 Instruction Manual
Electromagnetically actuated dual-surface spring-applied brake for dry running
Hide thumbs
Also See for COMBISTOP 38:
- Instruction manual (47 pages) ,
- Instruction manual (48 pages) ,
- Instructions for use manual (58 pages)
Table of Contents
Advertisement
Operation
5
Operation
5.1
Actuating the Hand Release
As an option, the brake can be equipped with a hand release.
Warning!
In the event of malfunctions, the brake can be actuated using the hand release. To this
end, proceed as follows:
01.09.2011 Rev. 01
Loss of Braking Efficiency!
Before actuating the hand release, mechanically secure the load
against unintended movements! Secure the elevator car against falling
down.
COMBISTOP Type 38
Steadily pull the hand release lever (1) in
the direction of the arrow (2) until the
brake is released.
Page 25
Advertisement
Table of Contents
