Transport And Storage; Inspections On Acceptance By The Recipient; Notes On Transport; Packaging - KEB COMBISTOP 38 Instruction Manual

Transport and Storage

3 Transport and Storage
The brake is delivered to the customer by a transport company that has been
authorised by the manufacturer.
3.1

Inspections on Acceptance by the Recipient

The brake is delivered to the customer in a cardboard packaging. On arrival at the
customer's premises, the brake needs to be checked for visible transport damages.

Immediately report the transport damages to the transport company and the
manufacturer.
3.2

Notes on Transport

Depending on its design and weight (see section "9.1 Technical Data"), the brake must
be lifted and transported using appropriate lifting devices.
3.3

Packaging

The packaging used to transport and protect the brake is normally made of cardboard.
3.4

Storage Instructions for Temporary Storage

If the brake is not installed immediately upon delivery or if the brake is not used in the
meantime, it must be properly stored in a dry place. The brake must be stored
temporarily so that neither dust nor moisture nor corrosive vapours can enter the brake.
01.09.2011 Rev. 01
Note!
Dispose of the packaging material according to the local regulations
and/or make sure that the packaging material is reused in an
environmentally responsible way!
Note!
In case of improper storage, no liability is assumed for resulting
damages!
COMBISTOP Type 38 Page 10