Lcd Icon Description; Buttons Description - Salus Quantum SQ610RF Manual

LCD Icon Description

20
19
18
17
16
15 14 13
1. Menu/Settings description + Clock
2. AM/PM
3. Temperature unit
4. Heating indicator (icon is animating when
there is heating demand)
5. Cooling indicator (icon is animating when
there is cooling demand)
6. RF Connection indicator
7. Internet connection indicator
8. Occupancy sensor (hotel card)
9. Key lock function
4
1
2
3
4
5
6
7
12 11 10 8
9
10. Standby mode icon
11. Current Temperature / Setpoint Temperature
12. Holiday mode
13. Temporary override mode
14. Settings icon
15. Baterry status indicator
16. External / Floor temp sensor indicator
17. Schedule program number
18. Schedule mode icon
19. Day indicator/ SET information
20. Current Humidity value

Buttons Description

Button Function
1) Menu button / Return button.
2) In the MAIN SCREEN: Press and hold for 3 sec to change the thermostat operating mode
(Schedule mode / Permanent mode / Temporary override mode).
3) In the SETTINGS SCREEN: Press and hold for 3 sec to go back without saving the changes.
4) In the PAIRING SCREEN (in SYSTEM TYPE Menu): Press and hold for 3 sec to see other
pairing options.
„Down" Button (Decrease parameter value/moving on the menu in 'DOWN' direction)
"Up" Button (Increase parameter value/moving on the menu in 'UP' direction)
1) Press and hold for 3 seconds to POWER UP new device
2) "OK / Tick" Button (Confirm parameter value / Go to the next menu / Save settings)
3) In the MAIN SCREEN: Press and hold for 3 seconds to enter Standby mode
4) In the SETTINGS SCREEN: Press and hold for 3 sec to go back to the MAIN SCREEN & SAVE all the changes.
5) During PAIRING process – hold button for 3 seconds to POWER OFF or REBOOT the thermostat.
In the MAIN SCREEN - press and hold these buttons together for 3 seconds to LOCK / UNLOCK
+
the Thermostat keys).
5