Test Mode (Lk-1910, 1920) - JUKI LK-1910 Engineer's Manual

10. TEST MODE (LK-1910, 1920)

™ Purpose of the test mode
This mode is set to facilitate the electrical check for the maintenance work.
™ List of items of the test mode
Indication No.
Input signal check
Origin retrieval
Continuos operation
Number of revolutions of main
shaft check
Solenoid and solenoid valve
output check
Item
State of input of the switch and the sensor will be indicated by 8 LEDs.
For origin adjustment, return to origin operation, feeding operation and
origin sensor will be indicated.
Initial setting of the operation conditions will be performed, and the
mode will move to the continuous aging mode.
Output of the specified number of revolutions will be made, and the
actual number of revolutions will be indicated. (No adjustment)
Output of solenoid and solenoid valve will be checked.
104
− −
Description