Installing The Intermediate Presser Bar Guide Bracket Support Plate; Adjusting The Position Of The Intermediate Presser Bar Guide Bracket - JUKI LK-1910 Engineer's Manual

2) Installing the intermediate presser bar guide bracket support plate

1. Be sure to install intermediate presser bar guide bracket support plate 1 so that top end section A
of intermediate presser bar guide bracket support plate comes in close contact with the bottom
face of intermediate presser guide bracket 2.

3) Adjusting the position of the intermediate presser bar guide bracket

1. Protruding amount of intermediate presser bar 3 from intermediate presser bar guide bracket 2
is 12.5 mm.
2. Needle passes the center of the intermediate presser.
Standard Adjustment
2
A
1
3
12.5 mm
2
1
9
− −
Close contact
Close contact
4
5