How To Start The Memory Switches; How To Change The Contents Of Each Setting - JUKI LK-1910 Engineer's Manual

(3)

How to start the memory switches

Perform the start of the memory switches as described below.
[How to start the level 1]
Step 1 : Turn ON the power switch while keeping the
key on the operation panel held depressed.
The displays on the
operation panel give
the indications as
shown below.
002. SCALE CONV
INC/DEC STITCH
Fig. 2
(4)

How to change the contents of each setting

The sequence of the way of change when starting level 1 and level 2 is shown in the figures below.
Step 1 : Start of the level 1
Start setting of the memory switch following the
starting way of the memory switch.
Step 2 : Press the indication of changing function No.
and select the function No. to be changed with
key.
Step 3 : Press the set item change indication keys,
key, and select the item desired to change.
Step 4 : Change the setting of the selected item using the
or key.
key,
or
, or
When the settings of the respective items have completed, write in
the memory the contents of setting following the steps below.
Refer the way of write-in to the next item.
−
[How to start the level 2]
Step 1 : Turn ON the power switch while keeping the
key on the operation panel held depressed.
The displays on the
operation panel give
the indications as
shown below.
> MEMORY SW MENU <
1. INITIALIZE
2. SET UP
3. EXIT
Step 1 : Start of the level 2
Start the level 2 following the starting way of the
memory switch.
Step 1 : The display gives the indication as shown below, and
the level 2 starts.
> MEMORY SW MENU <
1. INITIALIZE
2. SET UP
3. EXIT
If the above displays are given, select
1
Fig. 4
57
−
Fig. 3
, SET UP.