Write-In Of The Contents Of Setting - JUKI LK-1910 Engineer's Manual
Computer-controlled high speed bar tacking industrial sewing machine, computer-controlled high speed bar tacking industrial sewing machine with input function
Hide thumbs
Also See for LK-1910:
- Instruction manual (94 pages) ,
- Manual (6 pages) ,
- Handbook (272 pages)
Table of Contents
Advertisement
(5) Write-in of the contents of setting
After setting the respective items, write in the memory the contents of setting following the way of operation
as described below.
When changing again the setting.
Press the
key and the display returns to the set diaplay.
In case of start level 1
The display returns to the display at the time of sewing.
NO : 010
XS : 1000
YS : 1000
BC : 000
After finalizing the change of all settings, press
The display on the operation panel will be indicated as follows.
> WRITE EDITTED ?<
OK -> ENTER
NO -> CLEAR
PC : 0000
1
key.
When writing-in the contents of the change
to the memory.
Press the
key. And write-in the contents of the change
to the memory.
The panel indication will be as follows.
> MEMORY SW MENU <
1. INITIALIZE
2. SETUP
3. EXIT
Select "
EXIT".
Fig. 5
58
−
−
In case of start level 2
Hide quick links:
Advertisement
Table of Contents
