JUKI LK-1910 Engineer's Manual page 114

2 CP-2 (origin retrieval)
For origin adjustment, state of origin retrieval, feeding operation and origin sensor will be indicated.
Step Indicating section
Or
1
" " o r " " w i l l b e
indicated according to the
state of the sensor.
2
3
* Except for upper position (or upper dead point), error "E 3" will be indicated, and the origin retrieval will
be not executed even when the pedal switch is depressed. At this time, return the position to the upper
position using the hand pulley.
Checking measure
SELECT
Start switch
or
FORWARD BACK
109
− −
Explanation
JOG movement of the X/Y axes can
be changed by pressing down the
key.
SELECT
Depress the pedal switch, and the
sensor will execute the origin
retrieval.
[JOG movement]
Makes the selected axis move in the
direction of +/- one by one pulse.