Table of Contents
Advertisement
4) Since the machine has not been fully assembled, take
caution to lean the assembled machine toward the
floor, and insert and fasten the bolt into the hinge to
completely fix the machine to the table.
To prevent safety accidents, at least two persons shall be assigned to machine installation or
machine delivery.
Caution
5) Install the safety switch and safety switch bracket on
the sewing machine, and then adjust the bracket
location of the safety switch to make sure that the
attached safety switch can properly operate.
6) Complete the cable connection between the machine
and the control box, and fix the cables under the table
as in the figure (Determine the length of the cables
when fixing in consideration of the machine' s
erection).
Fixing Bolt
Safety Switch
Bracket
Safety Switch
Supporting Rubber
Table
Tightening Screw
Safety Switch
15
Advertisement
Table of Contents
