MINOLTA-QMS PagePro 4100 Series Service Manual page 90

7
Remove the four Fusing Paper Separators.
8
Slide the Heat Roller in direction (1) and pull it in direction (2) to remove one side of
the roller. Then pull the roller in direction (3) to remove it completely.
NOTE:
In order not to scratch the surface of the Heat Roller with the Fusing Separators, lift the
Separators as much as possible when removing or installing the roller.
(2)
(3)
1 Drive Gear
2
(1)
2 Heat Roller
75
1