MINOLTA-QMS PagePro 4100 Series Service Manual page 84

2
Hold the Transfer Roller Holder tightly and pull the Transfer Roller out from the right
side.
3
Disconnect the transfer roller at the joint and remove it.
NOTE:
• Attach the New Transfer Roller so that the guide film is placed upward.
• Press the Transfer Roller Holder and the Paper Separator down when attaching the
Transfer Rolls to the original positions.
1 Transfer Roller
2 Transfer Roller Holder
3 Joint
5
3
4 Paper Separator
5 Guide Film
69
2
1
4