MINOLTA-QMS PagePro 4100 Series Service Manual page 5

3.Use the specified parts.
• For replacement parts, always use the genuine parts specified in the manufac-
turer's Parts Manual. Installing a wrong or unauthorized part could cause
dielectric breakdown, overload, or undermine safety devices resulting in possi-
ble electric shock or fire.
• Replace a blown electrical fuse or thermal fuse with its corresponding genuine
part specified in the manufacturer's Parts Manual. Installing a fuse of a differ-
ent make or rating could lead to a possible fire. If a thermal fuse blows fre-
quently, the temperature control system is probably the cause, and action must
be taken to eliminate the problem.
4.Handle the power cord with care and never use a multiple socket.
• Do not break, crush or otherwise damage the power cord. Placing a heavy
object on the power cord, or pulling or bending it may damage it, resulting in a
possible fire or electric shock.
• Do not use a multiple outlet to which any other appliances or machines are
connected.
• Be sure the power outlet meets or exceeds the specified capacity.
5.Be careful about the high-voltage parts.
• A part marked with the symbol shown on the left carries a high voltage.
Touching it could result in an electric shock or burn. Be sure to unplug the
power cord before servicing this part or the parts near it.
6.Do not keep your hands wet when performing the procedures.
• Do not unplug or plug in the power cord, or perform any kind of service or
inspection with wet hands. Doing so could result in an electric shock.
7.Do not touch a high-temperature part.
• A part marked with the symbol shown on the left and other parts such as the
exposure lamp and fusing roller can be very hot while the machine is ener-
gized. Touching them may result in a burn.
• Wait until these parts have cooled down before replacing them or any sur-
rounding parts.
8.Make a ground connection at all times (This item may not be effected in the USA).
• Be sure to connect a ground wire to the ground terminal even when performing
an inspection or repair. Without proper grounding, electrical leakage could
result in an electric shock or fire.
• Never connect the ground wire to a gas pipe, water pipe, telephone ground
wire, or a lightning conductor.
9.Do not modify the product.
• Modifying this product in a manner not authorized by the manufacturer may
result in a fire or electric shock. If this product uses a laser, laser beam leakage
may cause eye damage or blindness.
ii