State Of Alerts - JRC JAN-7202 Instruction Manual

3.1.4

State of alerts

Alert
Emergency (Active)
alarms
Alarms Unacknowledged/raised alarm
Acknowledged/raised alarm
Unacknowledged/rectified
alarm
Acknowledged/resolved alarm
Warnings Unacknowledged/raised
warning
Acknowledged/raised warning
Unacknowledged/rectified
warning
Acknowledged/resolved
warning
Cautions (active)
*1 Example: Blinking on the screen can be stopped by acknowledging all the CPA/TCPA alerts that are
currently occurring.
State
Notified by lighting or blinking the icon on the
screen. A buzzer sound is not emitted.
Cleared when the alert cause is resolved.
Notified by blinking the icon on the screen and
emitting a buzzer sound.
The flashing display for an unacknowledged alarm
is continued until the alert is acknowledged, unless
otherwise specified in the equipment performance
standards.
Notified by lighting the icon on the screen. A buzzer
sound is not emitted.
Cleared when the alert cause is resolved.
Notified by blinking the icon on the screen. A
buzzer sound is not emitted.
At acknowledgement, the alarm disappears.
The icon on the screen is cleared.
Notified by blinking the icon on the screen and
emitting a buzzer sound.
The flashing display for an unacknowledged
warning is continued until the alert is
acknowledged, unless otherwise specified in the
equipment performance standards.
Notified by lighting the icon on the screen. A buzzer
sound is not emitted.
Cleared when the alert cause is resolved.
Notified by blinking the icon on the screen. A
buzzer sound is not emitted.
At acknowledgement, the warning disappears.
The icon on the screen is cleared.
The state of "active" is only displayed while the
alert is raised.
Cleared when the alert cause is resolved.
3-3
Description
*1
*1
Section 3 Bridge Alert Management (BAM)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27