JRC JAN-7202 Instruction Manual page 48

[5] Alert search
Alerts in the alert history list can be searched by specifying a condition.
For the search operation, refer to "Searching alerts".
Searching alerts
[Previous] (Search previous) button
1
Select a search target on the Search Filter combo box.
Any of the following search targets can be selected from the alert history list.
Priority, Equipment,
Rectified(UTC).
2
Enter up to 64 characters to be searched in the Search word input box.
3
When the [Next] button is clicked on, search starts in the downward direction from the
row currently selected in the alert history list. When the [Previous] button is clicked on,
search starts in the upward direction.
When the applicable alert is found, the row is selected.
When no applicable alert is found, the effect is displayed on the dialog. Click on [OK] and close
the dialog.
Memo
When the search target is Priority, Equipment, or Cause, search is performed under prefix search
and when the search target is Raised(UTC), Acknowledged(UT), or Rectified(UTC), search is
performed under suffix search.
Section 3 Bridge Alert Management (BAM)
Search filter combo box
Search Word input box
[Next] (Search next) button
Cause (initial value),
3-18
Raised(UTC), Acknowledged(UTC), and