Table of Contents
Advertisement
SmartLi-80Ah
User Manual
Figure 3-32 Fill the holes with sealing putty
(1) Paper protective film
Figure 3-33 Dustproof cover
(1) Top dustproof cover
Issue 02 (2020-05-17)
1. In the scenarios where covers are removed for routing cables, after routing cables and checking
cable connections, use sealing putty to fill in the gap between the cables and the cabinet.
2. After verifying the installation, reinstall all the covers.
3. Do not remove the dustproof cover before power-on to prevent dust inside the UPS.
Copyright © Huawei Technologies Co., Ltd.
(2) Rear dustproof cover
(2) Sealing putty
(3) Front dustproof cover
3 Installation
53
Advertisement
Table of Contents
