Huawei SmartLi-80Ah User Manual page 43

SmartLi-80Ah
User Manual
Knock the expansion bolt into the hole until the expansion tube completely fits into the hole.
The expansion sleeve must be completely buried under the ground to facilitate subsequent
installation.
Figure 3-9 Installing an expansion bolt (unit: mm)
1.
2.
3.
4.
Step 3 Wheel the cabinet to the installation position.
Step 4 Open the front door and remove the four plugs from the bottom of the cabinet.
Issue 02 (2020-05-17)
Drill a hole into the concrete floor using a hammer drill. The hole depth ranges from 52
mm to 60 mm.
Slightly tighten the expansion bolt and vertically insert it into the hole. Knock the
expansion bolt using a hammer until the expansion sleeve is fully inserted into the hole.
Partially tighten the expansion bolt.
Remove the bolt, spring washer, and flat washer.
Copyright © Huawei Technologies Co., Ltd.
3 Installation
36