Table of Contents
Advertisement
RX13T CPU Card
4.
Usage
4.1
Quick Start
4.1.1
Preparation
Obtain the Motor RSSK, and perform the steps described in 5.1.1 and 5.1.2, Quick Start, of the user's manual.
(R20UT3697EJ).
Mount CN5, CNA and CNB as shown in Figure 3-1 and Figure 3-2.
4.1.2
Replacing the CPU card
Confirm that the INV-BRD is powered off, detach the RX23T-CRD from the INV-BRD, and attach the product in its
place.
4.1.3
Preparation for Operation Test
Perform the steps described in 5.1.3 to 5.1.5 of the Motor RSSK user's manual (R20UT3697EJ) to prepare for motor
drive.
4.1.4
Operation Test
Perform the steps described in 5.1.6 to 5.1.9 of the Motor RSSK user's manual (R20UT3697EJ) in the order indicated,
turn on the power supply, enable motor rotation, change the motor rotation speed, and stop motor rotation.
4.1.5
Finishing the Operation Test
After the operation test is finished, confirm that the motor shaft is no longer rotating and turn off the stabilized power
supply output.
R12UZ0051EJ0100 Rev.1.00
Jul. 22, 2019
Figure 4-1 CPU card replacement
User's Manual
Page 10 of 18
Advertisement
Table of Contents
