Slow Blow Fuse; Power Outlet; Storage Box - Komatsu WA320-5H Operation & Maintenance Manual

Wheel loader
Table of Contents

Advertisement

EXPLANATION OF COMPONENTS

SLOW BLOW FUSE

If the power does not come on when the starting switch is
turned ON, the slow blow fuse may be blown, so check and
replace it.
The slow blow fuse is beside the engine on the left side of the
machine.
1. Open the cover (1).
2. Open the cover of slow blow fuse box (2) and inspect.
For details of the method of replacing the slow blow fuse, see
Section "REPLACE SLOW BLOW FUSE (4-35)".
SLOW BLOW FUSE
(A) 80A: Chassis power source
(B) 120A: Engine preheating power source
(C) 30A: Battery power (starting switch, hazard)
(D) 30A: Fuel solenoid power source

POWER OUTLET

Removing the cigarette lighter (1) allows use of its power. The
maximum electric current is 7 A (168 W).

STORAGE BOX

This is under the operator's seat.
Use this box to keep small items and tools.
REMARK
The storage box is not waterproof. When washing the floor,
remove all documents and other items that may be damaged
by water, and keep them in a waterproof bag.
3-48
OPERATION
3
3
3

Advertisement

Table of Contents
loading

Table of Contents