Komatsu WA320-5H Operation & Maintenance Manual page 300

ATTACHMENTS, OPTIONS
INPUT METHOD FOR TELEPHONE NUMBER
It is possible to display the telephone number on the right side of "CALL" displayed on the character display when
action code "E03" is generated.
1. Press the ( ) of monitor panel selector switch 1 and dis-
play "LOAD METER".
2. Press (>) or (<) of monitor panel mode selector switch 2
and display "TEL".
3. Press ( ) of monitor panel mode selector switch 1. It will
change to the display in the diagram on the right.
Once the telephone number is input, the input number will
be displayed next time.
4. Up to 12 digits can be displayed for the telephone number.
Input from the first digits.
The cursor is displayed at the input position. Press (>) or
(<) of monitor panel mode selector switch 2 and display "0 -
9". To leave a blank, select "*".
When the input value is decided, press (
panel mode selector switch 1. The cursor will move to the
next position.
5. Repeat the procedure in Step 4 until the last digit. At the last digit, press ( ) of monitor panel mode selector
switch 1 to return to the previous screen.
If there is a mistake in the input or the input is to be stopped, press ( ) of monitor panel mode selector switch
1 to return to the previous screen.
6. When completing the operation, press ( ) of monitor panel mode selector switch 1 twice or turn the starting
switch OFF.
) of monitor
MACHINE MONITOR WITH LOAD METER
6-53