Komatsu WA320-5H Operation & Maintenance Manual page 125

OPERATION
ADJUST SEAT BELT
Always wear the seat belt.
q Before fastening the seat belt, check that there is no abnormality in the belt mounting bracket or
mounting belt. If the belt is worn or damaged, replace it.
q Fasten the seat belt before starting operations.
q Always wear the seat belt during operations.
Fastening and removing belt
2. Sit on the seat, hold buckle (2) and tongue (3) with your left
and right hands, insert tongue (3) into buckle (2), then pull
the belt to check that it is securely locked.
3. When removing the belt, press the red button in buckle (2)
to free the belt.
Fasten belt along your body without kinking it. Adjust the
lengths of the belt on both the buckle and the tongue sides
so that the buckle is located at the mid-point of your body
front.
3-66
WARNING
OPERATION