Komatsu WA320-5H Operation & Maintenance Manual page 279

MACHINE MONITOR WITH LOAD METER
4. If the display is "REMAINS MODE", press the (>) or (<) of
monitor panel mode selector switch 2 to display "ADDI-
TION MODE".
5. Press the ( ) of monitor panel selector switch 1 and dis-
play "MATERIAL < > SELECT".
6. Check the display for the selected material on load meter
display (1).
The present selection display is A.
In the case of the addition mode, "TOTAL LOADED" is dis-
played on display (2).
7. If A is to remain selected, press the ( ) of monitor panel
mode selector switch 1. A is then selected.
If A is to be changed to B to E, press the (>) or (<) of moni-
tor panel mode selector switch 2 to select the type of mate-
rial, then press the ( ) of monitor panel mode selector
switch 1.
8. This completes the setting of the addition mode.
The character display returns to the normal service meter
and time display.
Once the setting has been made, even if the starting switch
is turned OFF and operations are stopped, the setting is
retained. When operations are started again, there is no
need to carry out the setting again. All further loads will be
added to the total load recorded before operations were
stopped.
6-32
ATTACHMENTS, OPTIONS