Check Axle Oil Level, Add Oil - Komatsu WA320-5H Operation & Maintenance Manual

MAINTENANCE

CHECK AXLE OIL LEVEL, ADD OIL

q When checking the oil level, apply the parking brake and secure the front and rear frames with the
safety bar.
q After stopping the engine, the parts and oil are at a high temperature. Wait for the temperature to go
down before starting the operation.
Carry out this procedure if there is any sign of oil on the axle case.
Carry out the inspection with the machine on a horizontal road surface.
(If the road surface is at an angle, the oil level cannot be checked correctly.)
q A: Front
B: Rear
1. Stop the engine and remove oil level plug (1).
REMARK
Remove the mud and dirt from around plug (1), then remove
the plug.
2. Wipe off any oil adhering to the oil level gauge attached to
plug (1) with cloth.
WARNING
SERVICE PROCEDURE
4
4-27