Introduction; Intended Use; Directions Of Machine - Komatsu WA320-5H Operation & Maintenance Manual

FOREWORD

INTRODUCTION

INTRODUCTION 1
This loader is a machine with independent transmission, moving on chains or wheels. Driving in forward direction,
the loader can load or dig material using its attachments intended for loading operations (i.e. bucket).
The standard operation cycle of a loader includes filling up and loading of the bucket, transporting the material and
emptying the bucket.

INTENDED USE

If you use the machine for any other purpose than specified above, we will not accept any responsibility for safety.
All considerations concerning safety will then be up to the owner or the operating and maintenance personnel. In
any case, neither you nor any other person are/is authorised to perform work and functions explicitly prohibited in
these operating instructions.
The transport of persons in the work equipment is strictly forbidden!
For details of the operating procedure, see "WORK POSSIBLE USING WHEEL LOADER (3-86)".

DIRECTIONS OF MACHINE

1
Front
Bucket
Left Right
Rear
In this manual, the directions of the machine (front, rear, left, right) are determined according to the view from the
operator's seat in the direction of travel (front) of the machine.
1-6