Figure 20
1. Switch for model 31654
Figure 21
1. Switch for models 31657 and 31659
Completing the Installation
Installing the Bulkhead Panel
1.
Align the 4 holes in the bulkhead panel with the
4 clip nuts on the chassis; refer to
Removing the Bulkhead Panel (page
2.
Secure the bulkhead panel to the chassis of the
machine with the 4 bolts, 4 lock washers, and 4
flat washers; refer to
Bulkhead Panel (page
3.
Torque the bolts to 7.7 to 11.6 N∙m (68 to 103
in-lb).
4.
Connect the 2 pin connector to the number plate
if previously disconnected.
Installing the Fuse
Models 31657 and 31659
g034461
1.
Remove the fuse-block cover
Note:
On models 31657 and 31659, the fuse
block is located next to the battery.
g344108
1. Fuse block
2.
Install the fuse in the appropriate location; refer
to the fuse block decal
3.
Install the fuse-block cover.
7
Figure 7
3).
Figure 7
in
Removing the
3).
(Figure
22).
Figure 22
2. Fuse-block cover
(Figure
23).
Figure 23
in
g328464
g328465