Bolt (#10 X 1/2 Inch) - Toro 132-9543 Installation Instructions Manual

Installing the Slot Cover
Diesel Engine Only
Use the bolt (#10 x 3/8 inch) to secure the slot cover to the
console (Figure 20).
Figure 20
1. Bolt (#10 x 3/8 inch)
Installing the Function-Control
Assembly
1. Use the bolt (#10 x 1/2 inch) and locknut to secure the
function-lever bracket to the console
Figure 21

1. Bolt (#10 x 1/2 inch)

2. Locknut
2. Slot cover
(Figure 21).
3. Function-lever bracket
2. Use the locknut, flat washer, spacer tube, and bolt that
you removed earlier to secure the handle assembly to
the bracket (Figure
1. Locknut (10 mm)
2. Flat washer
3. Spacer tube
3. Use the nuts and lock washers that you removed earlier
to secure the proximity sensors to the function-lever
bracket (Figure 23).
1. Nut
2. Lock washer
4. Install the knob to the function-lever shaft.
9
22).
Figure 22
4. Split bushing
5. Lever assembly
6. Bolt (10 mm x 40 mm)
Figure 23
3. Proximity sensor