Input Of The Limiting Values Using The Keyboard; Deletion Of The Limiting Values - KERN 470 Series Operating Instructions Manual

Important!
In case the balance should be unstable in the range of the limiting points,
the vibration filter should be turned less sensitive, see point 10 „General
programmations".

7.2 Input of the limiting values using the keyboard

Press S and release it when
Now flashing display of either
Press TARE,
0
weight, using the keyboard" with example 321,5 g i.e. lower limiting value.
After having confirmed the lower limiting value with S
or the memorised upper limiting value.
Press TARE, 0
Input the upper limiting value as explained above and confirm with S.
Weighing with tolerance range see point 7.1.

7.3 Deletion of the limiting values

Press S and release it when
Now flashing display of the actual memorized lower limiting value.
Press TARE,
deleted.
Now the upper limiting value appears flashing.
Press TARE, 0
The limiting points can also be changed by over-writing.
Important:
Limiting values have to be deleted in order
to return to the weighing mode.
44
L. SEt appears.
0
start to flash. Further see point 6.4.2 „Input of the reference
starts to flash.
L. SEt
0 Starts to flash. Confirm with S, the lower limiting value is
starts to flash. Confirm with S, the upper limiting value is deleted.
or of the actual memorised lower limiting value.
appears
0 will appear flashing,
470-BA-defs-0017