Entering The Limit Values Using The Keyboard - KERN EW-N Series Operating Instruction

6.2.4.3 Entering the limit values using the keyboard

Operation
1. Use the key to switch the balance
on.
Set tolerance weighing:
Press the key until [L. SEt] appears
and then release.
2. Flashing display is either 000.000 or
the currently stored lower limit value.
Press the key:
The last digit in the display starts to flash.
3. Use the key to increase the nu-
merical value of the selected digit.
4. Use the key to select the digit you
wish to alter (from right to left).
5. Further entries as described in items
3 and 4.
6. Use the key to store. The stored
lower weight value is displayed briefly.
Entry is now completed if 1 tolerance
mark was selected in the basic setting
(chap. 7.2.1).
EW/EG-N-e-1728
Display
ο
0 I I I F
0.000
L. SEt
000.000
M
000.001
M
000.005
M
000.025
M
77.385
M
g
g
g
g
g
g
43