Accumulator Operation (Optional); Technical Data; Assembling Instructions - KERN 470 Series Operating Instructions Manual

11 Accumulator operation (optional)

11.1 Technical data:

LOADING TIME: Approx. 8 hours when the balance is turned off.
Operating time:
Automatic shutoff:
An automatic shutoff can be programmed (see point 10 „General programmations").
When it has been programmed the indication will be shut off 3 minutes after the last
utilisation of the balance.
Sleep-control lamp (at the bottom left in the user field):
Lights up when an automatic shutoff took place.
Load control lamp (at the bottom left in the user field):
Lights up when the battery voltage is falling below the minimum.

11.2 Assembling instructions

Turn off the balance and disconnect it from the mains. Remove the weighing plate and
release the 2 screws in the frame below the plate (see illustration).
Lift carefully the upper part of the casing upwards and lay it on the left side.
Important!
The upper part of the casing is connected with the lower part by a cable.
Take care when you lay it down.
470-BA-defs-0017
Approx. 5 hours at continuous operation.
53