General Programmations - KERN 470 Series Operating Instructions Manual

10 General programmations

The manufacturer has set a certain default configuration. This marked with *.
It can be changed as follows:
Press F for approx. 4 seconds, release when
Upon release
The various functions will be called up by pressing F repeatedly.
The individual setting within the various functions will be called up by pressing TARE
repeatedly.
The following adaptations are possible:
The following adaptations are possible:
Weighing
Weighing and parts
counting
Weighing in percent
Weighing and
conversion
470-BA-defs-0017
appears.
1 SEt 1
F
1 Set.
↓ ↓ ↓ ↓
↓ ↓ ↓ ↓
↓ ↓ ↓ ↓
2 SE1.
↓ ↓ ↓ ↓
Follow at zero adjust
Func Appears.
T
1*
2
3
4
4*
1,2,3
3A.O
See point 6.1
See point 6.2
See point 6.3
See point 6.4
Use always this setting
Not documented
49