Download Print this page
Bowflex SelectTech Stand User Manual

Bowflex SelectTech Stand User Manual

With media rack for bowflex selecttech 552; bowflex selecttech 560; bowflex selecttech 1090 adjustable dumbbells

Advertisement

Quick Links

Important Safety Instructions - Before using this equipment, obey the following warnings:
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all
Warnings on this equipment.
• Children must not be let on or near to this equipment. Moving parts and other features of the equipment can be dangerous to children. • Not intended for use by
anyone under 14 years of age. • Not intended for use by persons with medical conditions where those conditions may impact the safe operation of the equipment
or pose a risk of injury to the user. • Consult a physician before starting an exercise program. Stop exercising if you feel pain or tightness in your chest, become
short of breath, or feel faint. Contact your doctor before using the equipment again. • Examine this equipment for loose parts or signs of wear. Tighten or replace
any worn or loose components before use. Examine all fasteners carefully. Contact your local distributor for repair information. • This equipment is for home use
only. • Set up and operate stand on a hard, level surface. • Keep at least 1.3 m (50") clear on each side of the stand. This is the recommended safe distance for
access and passage around the stand. • Keep third parties out of this area when the device is in use. • Do not stand, sit or climb on this device. • Read and under-
stand the complete user guide. Keep manual for future reference. • Read and understand all warnings on this device. If at any time the warning stickers become
loose, unreadable or dislodged, contact your local distributor for replacement stickers. • Children must not be allowed on or near to this device.
Nautilus, Inc., www.nautilusinternational.com | Nautilus, Inc., 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. | Printed in China | © 2017 Nautilus, Inc. | ® indicates trademarks registered in the United States. These
marks may be registered in other nations or otherwise protected by common law. Bowflex, the B logo, and SelectTech are trademarks owned by or licensed to Nautilus, Inc. | ORIGINAL DOCUMENT - ENGLISH VERSION ONLY

Specifications

Total Surface Area (footprint) of equipment:
4241.5 cm
2
Stand Weight:
approx. 13.5 kg / 29.8 lbs
Maintenance
The safety and performance of this product can be maintained only if it is examined regularly for damage and wear.
Examine the equipment before each use for damage and wear. Replace broken components immediately or put the equipment out of use
until repaired.
Daily/Before Each Use:
Examine equipment. Make sure it looks in good condition and operates smoothly. If you find damage, DO NOT USE. Contact your
local distributor
for servicing.
Daily/After Each Use:
Clean equipment with a clean, dry cloth. Do not use cleansers containing enzymes.
Weekly: Clean equipment fully with a clean cloth and ammonia-based cleaner.
Monthly: Examine the frame for signs of cracking or permanent bending. Do not use the equipment if you see these signs.
immediately.
If you have any questions on the correct use or maintenance of this equipment, contact your local distributor. Only Nautilus-trained or Nautilus-authorized
personnel should make extensions, readjustments, modifications, or repairs.
Bowflex
®
( for use with the Bowflex
(660 in
)
2
321.1 cm
(126.4")
SelectTech
Stand with Media Rack
®
SelectTech
552, 560 or 1090 Adjustable Dumbbells )
®
®
66.9 cm
(26.4")
Touch up any scratches with touch-up paint to prevent rust, if necessary.
Serial Number label
68.2 cm
(26.9")
63.4 cm
(25")
317.5 cm
(125")
Product Specification label
Contact your
User's Guide
8016324.031518.B
local distributor

Advertisement

loading

Summary of Contents for Bowflex SelectTech Stand

  • Page 1: Specifications

    Nautilus, Inc., www.nautilusinternational.com | Nautilus, Inc., 5415 Centerpoint Parkway, Groveport, OH 43125 U.S.A. | Printed in China | © 2017 Nautilus, Inc. | ® indicates trademarks registered in the United States. These marks may be registered in other nations or otherwise protected by common law. Bowflex, the B logo, and SelectTech are trademarks owned by or licensed to Nautilus, Inc. | ORIGINAL DOCUMENT - ENGLISH VERSION ONLY...
  • Page 2 Item Description Tools (included) Button Head Cap Screw, M10x1.5x20 Flat Washer, M10 Securing Nut, M10 Button Head Cap Screw, M10x1.5x70 Pan Phillips Screw, M3.5x9.5 Bumpers (for 552 or 1090 dumbbell) Item Description Flat Head Cap Screw, M5x0.8x12 Bottom Cross Brace Flat Washer, M5 Stand Leg, Left Securing Nut, M5...
  • Page 3 Step 2. ( for the 552, 560 or 1090 ) Assemble the Stand...
  • Page 4 Step 3. ( for the 560 ) Remove the Rubber Stabilizers and then Attach the Dumbbell Bases Remove the dumbbell from its base before you attach the Dumbbell Base to the stand to make sure that the dumbbell does not fall during installation.
  • Page 5 Step 4. ( for the 552, 560 or 1090 ) Attach the Retaining Straps to the Stand and Fully Secure each Dumbbell Base Step 5. ( for the 552, 560 or 1090 ) Final Inspection Inspect your equipment to ensure that all fasteners are tight and components are properly assembled. Do not use or put the equipment into service until the equipment has been fully assembled and inspected for correct performance in accordance with the User’s Guide.
  • Page 6: Warranty

    Date of Purchase __________________________ To register your product warranty, contact your local distributor. For details regarding product warranty or if you have questions or problems with your product, please contact your local Bowflex distributor. To find your local distributor, go to: www.nautilusinternational.com...