Configuration And Project Engineering; Passwords - Siemens SINAMICS S120 Manual

4 Configuration and project engineering

4

Configuration and project engineering

In this chapter, you get to know how the individual components must be
parameterized. STARTER is used as the engineering software for
SINAMICS S120.
How the software project belonging to this application example was set-up is
described step-by-step in the following sections.
The screenshots were generated with the "English" language setting. Display
Note
differences can occur for other language settings.
4.1

Passwords

For reasons of simplicity, a common safety password is used for the program and
hardware on the SIMATIC components in the project.
Safety password for F-CPU: „0"
Safety password for SINAMICS: „1"
Such simple passwords must not be used in a real application as they do
NOTICE
not provide adequate protection against authorized personnel accessing
the configuration.
16
PROFIsafe SLS Override
Version 1.0, Entry ID: 81682475