Siemens SINAMICS S120 Manual page 29

No. Action
Check the address settings for
the input and output range of the
data.
13.
In this example, the following
applies:
Input address: 10..14
Output address: 10..14
Now make the settings as shown
in the adjacent screenshot.
To do this, go to the
"Parameters" tab.
It should be noted that only
14. channel 7 is activated. The
checkmark for "Activated" should
be removed for all other
channels.
For channel 7, also remove the
checkmark for "Diagnostics: wire
break".
Now insert SINAMICS S120 into
the hardware configuration.
In the catalog
select a SINAMICS S120 with
CU320-2 PN and
15.
drag the component with version
V4.6 and drop at the PROFINET
connection that has been
created
(Ethernet 1).
PROFIsafe SLS Override
Version 1.0, Entry ID: 81682475
4 Configuration and project engineering
Remark
29